The following APEC preview from Ametherm is being sent to you again to correct an NTC temperature probe part number. The correct part number is PANR 103395-342. We apologize for any inconvenience.  Click here to view in browser.
	Ametherm at APEC 2018 March 4-8 San Antonio, Texas Booth 640

At APEC 2018, Ametherm will be showcasing a wide range of its leading NTC and PTC inrush current limiters for reliable circuit protection and NTC thermistor sensors for high-accuracy temperature compensation and measurement. Made in the U.S.A., Ametherm's products are recognized by Underwriters Laboratories (UL) and the Canadian Standards Association (CSA International) for ensured safety, and many are RoHS-2-certified. Ametherm products are available directly from Ametherm or through distributors such as Digi-Key and Mouser.

Products on Display at APEC 2018

MS35 Series of Rugged NTC Thermistors
Optimized for applications such as wind turbines, solar power inverters, battery chargers and DC/DC converters, the MS35 series is designed to withstand high input energy from 500 J to 750 J and steady-state current from 10 A to 50 A. These devices offer resistance at 25 °C from 0.5 Ω to 20 Ω and thermal time constants from 65 s to 240 s. Featuring a diameter of 38 mm and thickness less than 10 mm, these thermistors do the same job as a power resistor and relay, yet in a smaller single-part alternative, saving valuable circuit board space.

https://www.ametherm.com/inrush-current/ms35-inrush-current-limiters

http://www.redpinesgroup.com/Ametherm/Ametherm_MS35.jpg

MM35-DIN Series of High-Power NTC Thermistors
The MM35-DIN series is designed to withstand high input energy of 1200 J and steady-state current from 50.0 A to 80.0 A at 680 V. Offered in DIN-rail-mountable packages, these inrush current limiters are optimized for high-power industrial and green energy applications, including variable frequency motor drives, wind turbines, large inverters, single- and three-phase motors and transformers. The MM35-DIN series features resistance at 25 °C from 0.2 Ω to 1.5 Ω, with maximum power of 38.4 W.

https://www.ametherm.com/inrush-current/mm35-din-series-high-power-inrush-current-applications/

http://www.redpinesgroup.com/Ametherm/Ametherm_MM35.jpg

PANR 103395-342 NTC Temperature Probe
The PANR 103395-342 features a ring lug for easy and secure mounting to battery terminals. This NTC thermistor temperature sensor is extremely accurate and experiences minimal drift from its initial electrical values to provide a high-stability replacement for thermocouples. The device features a high-dielectric withstand voltage, resistance at 25 °C of 10 kΩ, beta of 3950° K and dissipation constant of 8 mW/°C.

https://www.ametherm.com/thermistor/battery-terminal-temperature-sensor-lithium-ion

http://www.redpinesgroup.com/Ametherm/Ametherm_PANR_103395_342.jpg

# # #

About Ametherm
Ametherm, headquartered in Carson City, Nevada, was founded in 1994 and specializes in thermistors for temperature sensing and inrush current limiting in industrial, automotive, AMS (avionics, military and space) and many other markets. Ametherm's devices are some of the highest rated in the industry and are available in customized versions to meet the needs of specific applications. For more information, visit www.ametherm.com or call 800-808-2434.

Agency Contact: Bob Decker Redpines +1 415 409 0233 bob.decker@redpinesgroup.com

Ametherm Contact: Lori Morton Ametherm +1 775 884 2434 lori@ametherm.com

ENDS